蜜桃社区

  • Integral Waterproofing & Durability Solutions
  • Contact Us

This past year, dealing with a shortage of lithium has become a very real worldwide obstacle. The cause of which has been a , which require the material for their rechargeable batteries. This has put more pressure on lithium suppliers as current operations aren鈥檛 capable of meeting the growing demand worldwide. That has made lithium harder to get a hold of. It鈥檚 also made it much more costly, raising its global average price for a metric ton from $11,561 to $61,943 within a few months.

It鈥檚 a big spike in demand and expense for lithium, which could spell trouble for those trying to mitigate alkali-silica reaction (ASR) in their concrete. After all, lithium-based admixtures are a conventional way of mitigating ASR. And without treatment, ASR could be a serious danger to concrete structures. As a reaction between aggregates made with silica and alkali compounds, it forms water-absorbing gel that can expand enough to crack the concrete and threaten its structural integrity.

Of course, the industry still doesn’t fully understand the reason for how lithium admixtures work against such a reaction. But it鈥檚 been that they can mitigate ASR by reducing expansive properties, silica dissolution, repolymerization of silica and silicates, or repulsive forces between colloidal ASR gel particles.

No matter how it works, though, it鈥檚 clear that lithium is an ASR mitigation solution that will be in short supply for the foreseeable future.

Building professionals of all types are sitting around a table discussing their options around a shortage of lithium.

It Will Likely Lead Builders to Focus on Other ASR Mitigation Methods

While many still consider lithium admixtures to be a go-to ASR mitigation solution, they aren鈥檛 the only solution out there. Over the years, building professionals have looked heavily into the many different ways they could mitigate or prevent ASR. It led to the knowledge that there are three essential elements required to create the reaction: alkali, reactive aggregates, and water. With that in mind, professionals came up with methods that could lessen or remove one or more of these elements.

That Often Means Reducing or Eliminating Alkali and Reactive Aggregates

Typically, when looking to avoid contributing to the fundamental elements of ASR, building professionals focused mainly on reducing or eliminating the alkali or reactive aggregates in a concrete mix. For instance, in the past, builders have chosen to use low-alkali cements for their concrete. Some have even partially replaced their cement with pozzolins, such as fly ash and slag. And when possible, there have been cases of avoiding the use of reactive aggregates entirely.

But the Water Component of ASR Should Not Be Ignored

The previous ASR mitigation solutions tended to ignore that water is also a key component for ASR. This is most likely due to how difficult it would be to eliminate water from concrete altogether. After all, concrete is a porous material and more than capable of absorbing nearby moisture.

But that is only if you think about regular untreated concrete. Nowadays, there are plenty of ways to treat concrete so that much less moisture can get through its surface. The most common of which can include .

Depending on the quality of either, they can significantly limit how much moisture is able to enter concrete. And that will in turn highly minimize the impact of ASR.

But how exactly does either option work?

Well, if you went with a coating product such as , you鈥檇 find its Krystol technology would enable the treated concrete to chemically react to water and unhydrated cement particles. This reaction would form interlocking crystals. These would then fill up any concrete pores and micro-cracks, blocking potential pathways for water and waterborne contaminants. It’s a process that would use up any residual moisture, leaving the concrete dry, waterproof, and less likely to fuel ASR.

But if you went with a sealant such as (also known as Hydropel™ Sealer), your concrete would receive a blend of silane and siloxane compounds. These would create more of a water-repellent barrier. The concrete in this case would not be designed for protection against heavy hydrostatic pressure like it would be with Krystol T1. But it would still prevent a lot of moisture from entering your concrete in low-risk scenarios. And that would reduce the chances of ASR.

Of course, whichever coating or sealant you use, it will generally be more effective when applied to concrete that has yet to come into contact with a moisture source. If done otherwise, moisture could remain trapped in the concrete, increasing the risk of ASR.

A worker is adding KIM, a crystalline waterproofing admixture, to the concrete in a ready-mix truck during batching.

There鈥檚 Also a Newer, More Compelling Alternative to These Solutions

To expand on the current options available to building professionals, 蜜桃社区 collaborated with the University of Ottawa on a . During this study, the two organizations looked into the self-healing process of concrete and how that might be a pivotal factor against ASR.

The end results of this work proved to be quite promising. They indicated that with the help of either supplementary cementitious materials (SCMs) or self-healing crystalline waterproofing admixtures, they could modify the kinetics of ASR. This modification would delay the ASR process enough to give builders time to intervene against it and repair any damage.

For the best results, however, researchers noted that it was better to combine both SCMs and admixtures. More specifically, when the researchers used metakaolin with a crystalline admixture, nano-silica, and silica fume, they found they could produce ASR mitigation results that exceeded the results of samples with lithium nitrate.

Sunlight from the right is pouring over multiple buildings that surround a worksite with cranes nearby.

It May Be the Key to Avoiding the Impact of Lithium Shortages on ASR Mitigation

While there is a shortage of lithium going on right now, there doesn鈥檛 have to be a shortage in ASR mitigation solutions. There are other ways of handling ASR, whether that鈥檚 with reducing or eliminating alkali, reactive aggregates, or water. And now, there鈥檚 an even newer possibility of using a self-healing crystalline admixture and SCMs for results that could surpass lithium-based admixtures, leaving building professionals with a better option that鈥檚 much more available.

Related News

  • Concrete Best Practices

    Cold Weather Concreting (Came Early this Year)

    Written by: Kevin Yuers

    It is officially winter and it came early this year. For me, winter officially starts when I receive that first...

    Read More
  • Concrete Waterproofing

    Can anything really be waterproof?

    Written by: Kevin Yuers

    Traditionally, waterproofing of concrete structures has been accomplished using a membrane of some sort. The membrane can be anything from...

    Read More
  • Concrete Waterproofing

    What does waterproof mean?

    Written by: Kevin Yuers

    What does it mean to be 鈥渨aterproof鈥? Can anything really be truly waterproof? I鈥檓 not speaking philosophically. The question is...

    Read More
  • Concrete Waterproofing
    蜜桃社区's logo consists of a yellow diamond behind a gray webbed globe that has the name "蜜桃社区" over top of it.

    Why waterproofing with surface membranes is obsolete thinking

    Written by: Kevin Yuers

    A local issue making headlines in Vancouver is the destruction of the gardens above Robson Square in the heart of...

    Read More